![JoeWaZoo1](/img/default-banner.jpg)
- Видео 436
- Просмотров 738 192
JoeWaZoo1
США
Добавлен 10 дек 2006
Joe WaZoo's stuff
USB Memory Stick on FlexEdge
This video uses the SWD database example to read files from a USB Memory stick instead of the resident internal memory or a micro SD memory card in the FlexEdge. From my findings it treats the USB Memory stick just like the other memory card options.
Просмотров: 16
Видео
Change DisplayPage Resolution on FlexEdge
Просмотров 1514 часов назад
This video shows how I imported a C3.1 database from a 7" HMI into a DA70 in C3.2 and then needed to change the Size of the DisplayPage resolution to something larger. After doing this, I needed to reboot the DA70 to get the webpage to laod correctly. Don't know why that was the case as I tried it in both Google Chrome and Edge browsers.
File Viewer Primitive
Просмотров 2016 часов назад
This video shows the File Viewer primitive in action to show the Files on the SD memory card in the Graphite and DA70 device, and also show the files on the USB memory stick when inserted into the device. The key is to use C:/ for the SD memory card and D:/ for the USB memory stick.
Simple Tank Fill Logic using DX80 UCT Software
Просмотров 2316 часов назад
In this simple tank fill logic application, we take a 0-20mA sensor and via the settings of Threshold, Hysteresis, and Invert IO flag to operate the tank logic. You must use the BWA-UCT-900 USB to RS-485 cable to program the Gateway for this logic. Buy It! www.bannerengineering.com/us/en/products/part.19970.html Get the UCT software here:www.bannerengineering.com/us/en/products/part.87096.html?...
Adding Duplicate Devices Data Tags
Просмотров 6314 дней назад
This video shows how you can take a database with multiple Devices having the same Data tag structure, and open another version of same Database to copy/paste tags from one to the other.
Red Lion as ModbusTCP Master via Emulator to Crevis / Beijer IO
Просмотров 4821 день назад
This video quickly creates a Crimson 3.2 database in Emulator mode to talk to some Crevis / Beijer IO devices via ModbusTCP. I am using my wired Ethernet port to connect to the IO device. My laptop has an IP address of 192.168.100.123, and the Emulator HMI has an IP address of 192.168.100.20, and the Crevis / Beijer has an IP address of 192.168.100.7. Keep in mind that the Registers are all in ...
Joe WaZoo playing Guitar Hero
Просмотров 8121 день назад
Me being a Dork playing Guitar Hero to Carlos Santana
OEE Vertical Scatter Graph Demo
Просмотров 4721 день назад
This video shows examples of OEE data being shown in Bar Graphs and Scatter Graphs. This is just a demo using the Crimson 3.2 Emulator. All values are randomly generated for simulation purposes. Want a copy of the Database? Send me an email to wazoo@adcreps.com with your name, where you work and live, and request the file OEE_Vertical Scattergraph_G10.cd32.
The For Loop()
Просмотров 6121 день назад
This quick video goes through an example of how to use the For Loop() to populate some tags with Random values and also how to use the For Loop() to set all tags to some value. In this case we cleared all of the values.
RedLion as a OPC UA Server to Ignition
Просмотров 94Месяц назад
This video walks through how to do OPC UA comms between a RedLion device and Ignition software.
FlexEdge Cell Sled Config First Time
Просмотров 82Месяц назад
In this video we set up the Cell Sled for a FlexEdge DA50 or DA70 device. The key is that you must have SIM card from a cellular provider with a static IP address. See these guys for a SIM card: solvenetworks.com/
DisplayPage Selfies!!! PrintScreenToFile()
Просмотров 682 месяца назад
This video shows how to use the PrintScreenToFile() function to grab a screen capture of the current Display Page and save it as a .bmp file on the local resident SD memory card. You MUST have a SD memory card in the RedLion device to save it as that is our harddrive.
GetDriveStatus on FlexEdge
Просмотров 602 месяца назад
This short video shows how to use GetDriveStatus with a 'c' for the internal memory and a 'e' for the micro SD memory card. If your micro SD card does not work, try another one.
DA50 Tethered to Cell Phone via WiFi Sled
Просмотров 572 месяца назад
In this video I use the Wifi sled in a FlexEdge DA50 or DA70 to tether to my Phone for internet access. In this example I use the SendGrid.com settings for my SMTP for an email/text messages. Search my Channel for SendGrid on how to do that. This works great!
Beer Animation - 2D Movement
Просмотров 1732 месяца назад
This video shows how to make some beer bottles move across the screen like production. We use the DispCount to generate some numbers, the GetUpDownData to count up or down to some Limit, and GetUpDownStep to indicate if it is counting Up or Down. This is a great video to follow along and use the Emulator for testing.
Port Forward & Download Ports in C3.2
Просмотров 1213 месяца назад
Port Forward & Download Ports in C3.2
Navigation Arrows and PopUp Menu SideBar
Просмотров 863 месяца назад
Navigation Arrows and PopUp Menu SideBar
Convert Database from one HMI size to Another
Просмотров 743 месяца назад
Convert Database from one HMI size to Another
Load Different Database from image.ci3 Files
Просмотров 903 месяца назад
Load Different Database from image.ci3 Files
How to load a image.ci3 via the System Web Page
Просмотров 794 месяца назад
How to load a image.ci3 via the System Web Page
How to find User Name & Passwords for a C3.2 Device
Просмотров 2725 месяцев назад
How to find User Name & Passwords for a C3.2 Device
How to make RedLion be an OPC UA Client to Multiple OPC UA Servers
Просмотров 2005 месяцев назад
How to make RedLion be an OPC UA Client to Multiple OPC UA Servers
Combine two 16Bit Words into one 32Bit Word as Long
Просмотров 1145 месяцев назад
Combine two 16Bit Words into one 32Bit Word as Long
How to Add Mutliple MQTT Connectors in Crimson 3.2
Просмотров 865 месяцев назад
How to Add Mutliple MQTT Connectors in Crimson 3.2
Convert Time in Seconds to Minute:Seconds
Просмотров 1555 месяцев назад
Convert Time in Seconds to Minute:Seconds
Wazoo@adcreps.com
I have a question. How do I contact you?
Great!👍
Good afternoon Sr. Is it possible to use Crimsom software without having a RedLion Device?
Absolutely! Download Crimson 3.2 and run it in the Emulator mode. It will completely work for 15 minutes and then shut down. Just download again to the Emulator and your 15 minutes starts all over. Eventually you will need to buy something as that is how we support our families and make our house/rent payments. Watch this video: ruclips.net/video/Ccig4zCXkvc/видео.htmlsi=f3YrfY-xELxgxKSZ
Thank you Joe, I always learn something watching your videos
is there a way to get a log file to send out as like an email daily or way to set something up to pull the file automatically daily?
Watch this and send me an email so I can send you the example database. ruclips.net/video/jKXN6yhWGGI/видео.htmlsi=dTtYhbtMBLyw8l5O wazoo@adcreps.com
the server name IP address, is that the same IP address that is on network one, that I use to see my data logs and remote view?
That Server IP address should be the one for your email server. In this old video I used to use AuthSMTP.com for my email server. Now I am using SendGrid.com for this procedure. Watch this video. ruclips.net/video/yJfsNGyKlcU/видео.htmlsi=geUQDIwoIHJyEVg7
I must have the wrong plan. AT&T, told them I need a data plan with public static IP address. They told me my IP address. Worked with red lion. Set everything up the way you did. They say the APN should be i2gold but I get no bars with that. I get full bars if I put it on broadband but that doesn’t hold the static IP address. Back to try to get AT&T to make sure the plan is right. 🤦♂️ Thanks for all your amazing videos.
Hello @JoeWaZoo1 , just found your channel. Could you do a similar video on how to count days. Basically to count how many days have been worked safe without incident. And a way to reset it to zero if incident occurs. Thank you for sharing your videos.
How about this old video? ruclips.net/video/nguA9zuDqto/видео.htmlsi=0zYeCAOoqUjI_jx3
@@JoeWaZoo1_Geeks_Rule thank you this worked great for me. I was having trouble using the get hour to count because it was a read only. Your videos really help out!
Great videos! Do you have a video of how to set the cell sled up from the start? Have a DA70 with cell sled, put sim card in it, What to do from there to get to where you are now?
Himm... I don't have that exact thing but could make one up. #1 requirement on the SIM card is that it must be a DataPlan type account and if you want remote access into the DA70 you will need a Static IP address from your SIM provider. And also a valid APN #. Your typical AT&T or Verizon store employee is to stupid to be able to sell you this kind of SIM card. They will take your money but they will sell you the wrong thing 98.5% of the time. This site is who I usually refer folks for SIM cards, solvenetworks.com/
Here is my video on the subject: ruclips.net/video/YFVHUnnpjNA/видео.htmlsi=77u_mWAcL9J8mfh-
I did it but after done, this time I coul not access the HMI setting page via webserver, it looks like working as VPN server if enter HMI IP ip address
Can you plz do firewall in C3.2
Very cool! Thanks for the clip.
Well ya didnt have to cut up up😂
Let's not just pretend!
HOW TO CONVERT RS232 ASCII PROT0COL DATA TO MODBUS TCP OR MODBUS RTU IN RED LION CONTROLS?
Hey joe, I have a g10 and the screen is bad and I want to use this database on the new CR3000 with a 7 inch screen. Both are running 3.1 crimson. How do I convert to a different screen size?
Open up the G10 database in Crimson 3.1. Then go to File pull-down and choose Save Conversion. Pick CR3K 7" HMI and save file as a new name. You may need to tweak your DisplayPages a bit.
Awsome, thanks joe!
I always do pop-up menus on my HMIs. Folks like it…reminds them of Windows…great video as always
Hello sir, how can we query an SQL database to Red Lion ??
Look in the SQL section on the left side.
Joe.. Is the software you are using to configure the S15C a banner package or something you devolope to run on a RL HMI ?
All of the software used in this video is a database written in the Crimson software from RedLion Controls for their HMI products. Download Crimson 3.2 from RedLion.net and you should be able to build the same HMI program that I wrote. Or send me an email to wazoo@adcreps.com and I will send you my database. Banner does have their Snap Signal software. www.bannerengineering.com/us/en/products/software/snap-signal-configuration-software.html
@@JoeWaZoo1_Geeks_Rule thanks for the follow up.
Is this demo available somewhere?
I can probably find the old HMI database, but you would need to consult with your local Rep for hardware. Where are you located?
Do one with k50 io link lights
Excellent video. I noticed that you can do mathematical logic to adjust the registers. Do you have a video on how to do this? I couldn't understand how to do the scale transformation formula. I have 3 pieces of equipment, can you help me, please?
Do you mean like take values from a Register and do some kind of Scaling to transpose somewhere else? Maybe like this video? ruclips.net/video/7XSHUS7azwI/видео.htmlsi=i0h7OOBCl5NmYoZn
Thankyou
Its Pactware DC... and I don't have Turcks there only hilsher
Can you roll back the firmware if needed. Say from 3.2 gold to 3.1?
Thanks!..You're a wonderful person, don't ever change 🙂
Worked great! Thanks
Great!
Very helpful!
Any video on the Red Lion CR3000 HMI's? I want a splash screen to display for about 3 seconds then load the main UI when the HMI boots up. Have tried endlessly with the goto commands but no luck. Any suggestions? Using Crimson 3.1 Gold Edition.
Watch this video: ruclips.net/video/9Ju6DKFefQ4/видео.htmlsi=9HoQsWbt286LXoO5
outstanding!
Thanks!!
Worked great on a DA50 that I tested it on. Thanks for the vid!
I believe the limit is 4 of each connector.
Helpful.
Awesome Video. One question, the OPC Server option is not available in Crimson 3.0, If I install 3.2 will I be able to update the project in my panel (G308 or G310)
Is it possible to connect to Red Lion HMI with OPC enabled from a desktop computer that runs UaExpert, to read the tags? if so, can you make a video on how to do it?
Hmm... good question. I do not have any UA Expert videos on my site but let me see if I can whip up an example.
How does this look? ruclips.net/video/r7CZM2q3kU8/видео.htmlsi=8Wj6sjHtJAJqA0nW
I was in your Dallas class a few weeks back. Just watched this video. Thank you for this! It was informative and entertaining!
Great Info Joe
Hi Joe , nice videos. About smart duplicate issue looks like is a bug in crimson 3.1 Same thing happen to me when I try to use that feature.
It happens to me when I have a huge Crimson database open or if I have a Gazillion other apps open at the same time, or if I click the SmartDuplicate too fast and Crimson can not keep up. Usually I will save the database, close Crimson, and then re-open. Some things just require patience.
nice video Joe!
Hi Joe, this method work´s whith all models? For example, I have a Graphite G07 and crimson 3.2 and i need to transfer the Data log to a USB stick
I believe so but I have not tried it yet. You will find the settings for the Thumb Drive aka USB Stick in the Device Configuration settings under USB Devices. The settings should be the same there as in C3.0 for File Synchronization 1 or 2.
Haha...I just light the coals 😅
Great Joe, can I use indirect tag with the DPS001 modbus is gateway? Or is it only for HMIs?
This should work on any DSPSX, DSPGT, and DSPZR. It will not work on the low cost DSPLE unit. Check the lower right hand corner of Crimson for the System area and see if you have Functions-TagData and look for those Functions there.
@@JoeWaZoo1_Geeks_Rule thank you, I will. I appreciate you
Good video Joe
Thanks Joe, it helped me a lot since the manual is not so clear.
Joe!!! The things you are doing in Crimson are awesome! I just acquired an asset with a Red Lion in it and I am hoping to talk to someone about how to get started doing some basic programming in Crimson. Is there any way to get in touch with you directly!?!?!?
wazoo@adcreps.com